Description
Digital Systems DS520B Tracking System with Battery Backup & Virtual Ignition Option
This advanced Telematics system, provides a superb solution for customers that require very robust system with bullet proof long term reliability. This also helps in reducing cost and installation time, resulting in a competitive offer for your fleet.
TECHNICAL SPECIFICATIONS:
-
Power supply 12V/24V (voltage range 8-40V).
-
Power consumption: average 14-36 mA (depending on configuration of transmission intervals).
-
Power saving modes: GPS sleep and deepsleep – min. power consumption 1.2mA.
-
2 analogue inputs, operation as analogue inputs 0-10V/0-30V and digital inputs.
-
2 digital outputs (OC type).
-
Built-in 3-axis accelerometer to detect drive condition without connecting ignition circuit.
-
RS485 interface for communication with digital fuel level sensors (Technoton, Eljunga, Omnicomm, Technokom).
-
1-wire interface: iButton identifiers (Dallas DS1990A) and DS18B20 digital temperature sensors.
-
List of up to 500 authorized iButton identifiers.
-
Immobiliser function.
-
Quad-band GSM/GPRS modem Simcomm SIM800C.
-
Built-in GPS/GLONASS receiver Tytan Digital Systems GPS/GLONASS 1537 with simultaneous observation of GPS and GLONASS satellites.
-
Built-in GSM/GPRS modem 850/900/1800/1900MHz with external GSM antenna.
-
Built-in GPS/GLONASS/GALILEO/QZSS receiver with external active GPS/GLONASS antenna.
-
NMEA 0183 v3.01 (GGA, GSA, GSV, RMC, VTG) protocol.
-
High sensitivity: 161dBm.
-
32-bit Microchip MX7 microcontroller, 512kB Flash ROM, 128kB RAM.
-
Built-in 4Mb memory to store data. Capacity: up to 50000 reports.
-
Remote configuration and firmware upgrades via GSM/GPRS using FTP protocol.
-
Two LEDs signalling device operation.
-
USB port for configuration and device diagnostics.
