Video-inserter for Mercedes cars of generations NTG3 or NTG4 with Command APS, Audio50 APS or Audio20
To connect any two video sources (after-market devices eg DVD player, DVB-T tuner), RGB source, and a reversing camera.
Video-inserter for factory-infotainment monitors - 2 video-inputs for after-market devices (eg DVD player, DVB T tuner). - Integrated Audio Switch (no audio feed) - Reversing camera video input - Automatic switching to rear-view camera input on engagement of reverse gear - RGB video input for after-market navigation - Image quality control while driving (ONLY for connected video) - Compatible with factory rear-view camera - compatible AV inputs PAL / NTSC compatibility
Compatible with Mercedes Benz vehicles of generations NTG3 or NTG4 with Comand APS, Audio50 APS or Audio20 rectangular 10-pin HSD LVDS connector on the monitor . Comand APS (PCMCIA Slot ON button) installed among others in the following vehicles: - C-Class (W204) from 03/2007 to 02/2011 - CL-Class (C216) from 01/2006 to 05/2009 - CLC Class (CL203) from 09/2008 - E-Class (W212) from 04/2009 to 05/2011 - E-Class Coupe (W207) from 05/2009 to 05/2011 - CLS Coupe (C218) from 01/2011 until 05/2011 - GLK-Class (X204) from 09/2008 - S-Class (W221) from 10/2005 to 05/2009 - SLS (C197) from 03/2010 The Audio20 NTG4 and Audio50 APS NTG4 were partly longer installed as the above data. Audio 50 APS with only arrow navigation (Navi key but no PCMCIA to head-unit) are available as NTG4, there is no Audio50 APS NTG4.5. There is no Becker Map Pilot or preparation in combination with NTG4. This accessory indicates NTG4.5. When built in the end of 2012, we recommend otherwise before ordering to check whether the monitor or head-unit is a rectangular 10-pin LVDS screen terminal.
Video only: The interface feeds ONLY video signals into the infotainment one. In order to feed audio signals, a possibly existing factory-audio-AUX-input or a FM modulator can be used.Technical Data (Video Interface) operating voltage 7V - 25V Quiescent current <5mA current consumption 0.3A@12V power 2.4WVideo input 0.7V ~ 1V video input FormatePAL / NTSC RGB video amplitude 0.7V with 75 Ohm impedance temperature range -40 ° C to + 85 ° C Weight 195g Dimensions 182 x 24 x 100 mm (W x H x T) plot services (video Interface) FRONT - 8-pin plug (RGB) - 6-pin Molex connector (power) - 3 RCA jacks (VIDEO IN 1 & 2, RFK) - 8-pin connector (no function) BACK - 10-pin Molex connector (LVDS) - 8-pin plug (Audio) PAGE LINKS - 4-pin connector (external button), the driver must be diverted either directly or indirectly through moving pictures while driving. In most countries / states this is prohibited by law. This product, in addition to the operation in the state, only used to display fixed menus (for example the MP3 menu for DVD players) or images of the rear view camera while driving.