Description

Digital Systems DS540 CAN based Tracking System with Battery Backup

Name: Digital Systems CAN Tracking System with Battery Backup
SKU: DS540B
Availability: OutOfStock

This advanced Telematics system, with CAN Bus built in, provides a superb solution for customers that require vehicle data, such as fuel level, engine RPM and accurate vehicle mileage and speed, direct from the vehicle network. Unlike other products that require external interfaces, our elegant system provides accurate data within one superb system, which enables us to offer accurate data without compromise. This also helps in reducing cost and installation time, resulting in a competitive offer for your fleet.

TECHNICAL SPECIFICATIONS:

Power supply 12V/24V (voltage range 8-40V).
Power consumption: average 14-36 mA (depending on configuration of transmission intervals).
Power saving modes: GPS sleep and deepsleep – min. power consumption 1.2mA.
2 analogue inputs, operation as analogue inputs 0-10V/0-30V and digital inputs.
2 digital outputs (OC type).
Readouts of data from CAN and J1708 buses concerning over 800 cars and trucks.
Built-in 3-axis accelerometer to detect drive condition without connecting ignition circuit.
RS485 interface for communication with digital fuel level sensors (Technoton, Eljunga, Omnicomm, Technokom).
1-wire interface: iButton identifiers (Dallas DS1990A) and DS18B20 digital temperature sensors.
List of up to 500 authorized iButton identifiers.
Immobiliser function.
Quad-band GSM/GPRS modem Simcomm SIM800C.
Built-in GPS/GLONASS receiver Tytan Digital Systems GPS/GLONASS 1537 with simultaneous observation of GPS and GLONASS satellites.
Built-in GSM/GPRS modem 850/900/1800/1900MHz with external GSM antenna.
Built-in GPS/GLONASS/GALILEO/QZSS receiver with external active GPS/GLONASS antenna.
NMEA 0183 v3.01 (GGA, GSA, GSV, RMC, VTG) protocol.
High sensitivity: 161dBm.
32-bit Microchip MX7 microcontroller, 512kB Flash ROM, 128kB RAM.
Built-in 4Mb memory to store data. Capacity: up to 50000 reports.
Remote configuration and firmware upgrades via GSM/GPRS using FTP protocol.
Two LEDs signalling device operation.
USB port for configuration and device diagnostics.

The following short video shows the data acquired from the standard DS540 installed to the convenience CAN Network on a 2016 Mercedes Benz Vito W447 , notice the fuel level before the vehicle enters the garage and immediate update when it's been refuelled, showing the benefit of providing accurate data on the CAN Network.